1. 用途
  2. 地面铺装 (Floor Coverings)
  3. Needlefelt (枪刺毯)

枪刺毯 (Needlefelt)

该页面详情均为英文，请谅解。

sales/contact

Basics

  • Needlefelt carpets are normally made of Polyester or Polypropylene
  • High-quality products for the contract market have a surface out of polyamide monofilament fibres
  • The surface is either flat or shows a rip structure
  • For printing, polyester is widely used
  • Polypropylene can not be printed
  • Only plastisols or pigments would be possible - but with inferior rub fastness

Applications

  • Needlefelt carpets in the shape of endless carpet are used for exhibition carpets, events, weddings.
  • Needlefelt products in the shape of mats are used for the promotion industry, but also as a cheap and colorful product for residential use and as children play mats.

Printing Methods

  • Needlefelt can be printed either with CHROMOJET or with COLARIS technology
  • Printing lines may have a width of 2,200, 3,200 or 4,200 mm
  • Our recommendation concerning dyes or inks are high-energy disperse types, because they providegood coverage, sharp definition and excellent fastness
CHROMOJET800 - ZIMMER AUSTRIA

CHROMOJET.PRINTER

| Process color printing
 

  • CHROMOJET in combination with SUPRAPRESS is recommended for structured and ripped constructions
Colaris4 - DX 004_s.jpg

COLARIS.CARPET PRINTER

| Inkjet printing
 

  • COLARIS.CARPET PRINTER is recommended for flat fabrics

Printing Process

Printing Process ChromoJET

CHROMOJET for processing roll-to-roll carpets of 2,200, 3,200 or 4,200 mm width

  • Entry with unrolling, accumulator, center guiding
  • Spot printing with CHROMOJET, equipped with up to 16 colors
  • Minimizing dye pick-up by using SUPRAPRESS
  • Drying on a conveyor belt or in a stenter
  • High-temperature fixation at about 180°C / 356°F for about 2 minutes in a stenter, using infrared radiation or hot air or overheated steam
  • Washing and vacuum extraction
  • Drying
  • Winding
Printing Process Colaris

COLARIS for processing roll-to-roll carpets of 2,200, 3,200 or 4,200 mm width

  • Entry with unrolling, accumulator, pre-steaming, center guiding
  • Inkjet printing with COLARIS.CARPET PRINTER, using 4 or 6 colors
  • Drying on a conveyor belt or in a stenter
  • High-temperature fixation at about 180°C / 356°F for about 2 minutes in a stenter, using infrared radiation or hot air or overheated steam
  • Washing and vacuum extraction
  • Drying
  • Winding

Technical Data

Printing Machines
  CHROMOJET800 COLARIS
 Technology valve jets, with 50 or 76 dpi inkjet with 400x800 and 400x1200 dpi
 Printing on roll-to-roll 2,200, 3,200 or 4,200 mm width 2,200, 3,200 or 4,200 mm width
 Penetration
  • Excellent / full
  • Also on extremely ripped constructions
  • Good on flat products
  • Moderate on structured needlefelt constructions
 Speed up to 4 m/min up to 4 m/min
 Dye and Ink disperse dyes disperse or direct sublimation inks
 Number of basic colors up to 16 spot or process colors or any combination 6 process colors
 Recommendation For structured needlefelt products where good penetration is needed For flat and low-pile products

 

Get more information in our PDF's:

CHROMOJET 800 - Process Color Printing
COLARIS.CARPET Printer